Cybertron Blog

In March 2026 the FCC added foreign-made consumer Wi-Fi routers to its Covered List, the roster of communications equipment the agency considers a national security risk. Once something lands on that list, it cannot be imported for sale or use in the US. Because nearly all consumer routers are made overseas, that sweeps in almost the entire market. Here is what it actually means for your business, and it is not simple.

What the ban covers

Routers you already own or that were already authorized are grandfathered in, so nothing on your network shuts off overnight. The catch is new hardware. So far only NETGEAR and Adtran have earned conditional approval, and even that only lets them push updates to existing models, not sell new ones. Those conditional approvals run only through October 1, 2027, after which the firmware stops getting patched and the devices drift toward being dangerously out of date.

Why the FCC did it

The agency points to the Volt, Flax, and Salt Typhoon attacks, where routers were part of the infrastructure attackers used to get in. FCC Chair Brendan Carr framed the move as protecting US networks, critical infrastructure, and supply chains. Whatever you think of the politics, the underlying problem is real. An unpatched router sitting at the edge of your network is exactly the kind of soft target these groups look for.

Expect shortages and higher prices

Only a small fraction of consumer routers currently meet the new requirements, so supply is going to tighten and prices are going to climb. If the rules ever extend to business-grade gear, the disruption gets much bigger. Remote workers feel this too. Anyone running a personal router from a brand like ASUS, Linksys, Eero, or D-Link, or renting one from their internet provider, will eventually have to swap it for a compliant device, and they will likely pay more for it.

What to do now

Move to professional-grade hardware. Ban or no ban, your business should not be running on residential routers. Enterprise gear is more secure and more capable by design, and getting ahead of the shortage beats scrambling later.

Keep your firmware patched. While your current router is still in service, stay fully up to date. Every missed update is a wider window for an attacker.

Kill the default passwords. Networking hardware ships with default logins that attackers know by heart. Change them to strong, unique passphrases today.

Encrypt your traffic. A VPN shields your business traffic even if someone manages to intercept it.

This is the kind of change that is easy to ignore until it bites. Book a call and we will check whether your network is exposed and map out the switch before prices spike.

You are mid-meeting, or uploading a big proposal, and the loading wheel shows up. One sad bar of Wi-Fi. The usual reaction is to buy a faster plan or a router with eight antennas that looks like a robot spider. Hold off. Most of the time the internet and the hardware are fine. The problem is where the box sits. Here are three fixes that cost nothing.

Put the router in the middle

Think of your router like a lightbulb. Stick it in a far corner and the rest of the building stays dim. Wi-Fi radiates in every direction, so when the router is shoved against an outside wall, half of its signal is heading out into the parking lot. Move it toward the center of the space and every laptop, tablet, and printer has less distance to cover.

Get it off the floor

This is the mistake in about nine out of ten offices we walk into. The router is on the carpet, buried behind a filing cabinet and a knot of power strips. Radio waves spread sideways and down, so a floor-level router is firing a big chunk of its signal straight into the foundation. Concrete and metal floor supports act like a shield and kill it before it reaches your desk. Get it to eye level or higher. Mount it on a wall or set it on top of a bookshelf. Fewer obstacles, better connection.

Keep it away from interference

Your router does not play well with certain neighbors. Park it next to a microwave, a cordless phone base, or a big aquarium and you have a problem. Microwaves run on the same 2.4 GHz band as a lot of older Wi-Fi, and water absorbs signal, so a fish tank or heavy plumbing in the wall will choke it. Take a walk through your office. If the router is sitting beside the breakroom microwave or tucked behind a metal fire door, that is your dead zone explained. Metal, water, and competing electronics are the three things that wreck a wireless signal.

When placement is not enough

Your team should not have to do the Wi-Fi dance by the hallway just to send an email. If you have moved the router and still hit dead zones, the fix is usually a mesh system or proper wireless access points. Those blanket the whole office in one managed signal that does not drop the second someone walks into the conference room. We can map your coverage and tell you exactly what you need.

Book a call and we will run a quick network assessment.

The Internet is a staple in most offices around the world, and you’d be hard-pressed to find one that doesn’t rely on it in some fashion. A big part of seeing success with the Internet depends on your bandwidth, as well as your network’s capacity to reach the capabilities of your Internet service provider. Today, we want to break down what bandwidth is, as well as how you can make the most of your Internet package.

You probably use Google more than you care to admit, so what if we told you that you could be getting even more value out of your Google searches? Today, we want to share some strategies to customize your Google search results by making your searches more effective from the outset.